About the Data The dataset includes publicly available NHTSA investigation information related to the identification and correction of safety-related defects in motor vehicles and vehicle equipment. For more information on NHTSA investigations, including safety defect investigations, please visit https://www.nhtsa.gov/resources-investigations-recalls.

About the Data The dataset includes publicly available NHTSA investigation information related to the identification and correction of safety-related defects in motor vehicles and vehicle equipment. For more information on NHTSA investigations, including safety defect investigations, please visit https://www.nhtsa.gov/resources-investigations-recalls.

The University of Alaska Fairbanks (UAF) Alaska Hydrokinetic Energy Research Center was tasked with developing a real-time data telemetry / remote power generation system to monitor frazil ice conditions in the Kvichak River in support of the U.S. Department of Energy funded "Next Generation MHK River Power System Optimized for Performance, Durability and Survivability" project. A real-time telemetry system was requested because of the short time span between the end of the frazil ice season when the instruments would be recovered, limited vessel availability and the project end-date. To meet the project objectives, UAF designed and assembled a remote power/real-time data telemetry system that included an auto start propane generator, a small PV array, a small battery bank and line-of-sight radios as well as two sonar systems to monitor river velocity and water column acoustic backscatter strength. Both sonars included internal batteries for powering the instruments in case of failure of the shore based power system. The sonars, deployed in ~5 m of water on the bed of the Kvichak River, adjacent to the Village of Igiugig, Alaska were tethered to shore via a waterproof armored cable that conveyed power to the subsurface instruments and data from the instruments to the shore based telemetry system. The instruments were programmed to record data internally as well as to transmit data serially over the cables to the shore based system. The system was in-place between November, 2016 and June, 2017. While the real-time data telemetry system was not successful and the remote power generation power system was only partially successful, the system design included sufficient redundant power in the form of internal instrument batteries to enable the collection of nearly three months of overlapping velocity and backscatter data (from November through February) and a record of acoustic backscatter strength spanning the entire ~150 day frazil ice season between November, 2016 and ~April, 2017. This submission includes the overwinter ice study plan, dataset, and final report. The dataset includes modeled water velocity, discharge, and measured water velocity and acoustic backscatter strength in winter 2016-17 from the Kvichak River at the Village of Igiugig, Alaska, USA.

This submission includes an Electricity Generation Summary, Maintenance Logs, Detailed Operations Data, Operating Cost Summary, and an Operations overview at the Paisley Oregon Geothermal Plant. Data uploaded for SVEC by Tom Williams, NREL

Quick Stats is the National Agricultural Statistics Service's (NASS) online, self-service tool to access complete results from the 1997, 2002, 2007, and 2012 Censuses of Agriculture as well as the best source of NASS survey published estimates. The census collects data on all commodities produced on U.S. farms and ranches, as well as detailed information on expenses, income, and operator characteristics. The surveys that NASS conducts collect information on virtually every facet of U.S. agricultural production.

Quick Stats API is the programmatic interface to the National Agricultural Statistics Service's (NASS) online database containing results from the 1997, 2002, 2007, and 2012 Censuses of Agriculture as well as the best source of NASS survey published estimates. The census collects data on all commodities produced on U.S. farms and ranches, as well as detailed information on expenses, income, and operator characteristics. The surveys that NASS conducts collect information on virtually every facet of U.S. agricultural production.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

About the Data: The dataset includes recall information related to specific NHTSA campaigns. Users can filter based on characteristics like manufacturer and component. The dataset can also be filtered by recall type: tires, vehicles, car seats, and equipment. The earliest campaign data is from 1966. The dataset displays the completion rate from the latest Recall Quarterly Report or Annual Report data from Year 2015 Quarter 1 (2015-1) onward. Data Reporting Requirement: Manufacturers who determine that a product or piece of original equipment either contains a safety defect or is not in compliance with Federal safety standards are required to notify NHTSA within 5 business days. NHTSA requires that manufacturers file a Defect and Noncompliance Report in compliance with Federal Regulation 49 (the National Traffic and Motor Safety Act) Part 573, which identifies the requirements for safety recalls. This information is stored in the NHTSA database referenced above. Notes: The default visualization depicted here represents only the top 12 manufacturers for the current calendar year. Please use the Filters for specific data requests. For a complete historical perspective, please visit: https://www.nhtsa.gov/sites/nhtsa.gov/files/2023-03/2022-Recalls-Annual-Report_030223-tag.pdf.

Recent USDA/ARS patented technologies on crop production and protection that are available for licensing are described, including summary, contact, benefits, and applications. Updated June 2018.