Licensing rounds awarded by the Petroleum Affairs Division (PAD) in the Irish Atlantic Margin. The 2015 licensing round includes three regions. The Irish Atlantic Margin geographic coverage includes foreshore and offshore waters in what is known as the Currently Designated Irish Continental Shelf. Licensing awarded in 2015. PAD awarded licences to oil and gas exploration companies via licensing options upon application. The role in the Petroleum Affairs Division is to maximise the benefits to the State from exploration for and production (E%amp;P) of indigenous oil and gas resources. In doing this PAD ensure that activities are conducted with due regard to their impact on the environment and other land/sea users through appropriate licensing.

The Full Scale Atlantic Marine Energy Test Site (AMETS) provides 30 minute observational data from two directional waverider buoys known as Belmullet A and Belmullet B observing and measuring wave height, wave direction and wave period. The AMETS buoys are located in the North Atlantic Ocean in waters off the coast of the Erris Peninsula in Co. Mayo at 50m and 100m bathymetry depths. AMETS has been collecting data since 2012. A directional Waverider is a wave motion sensor stabilised platform that can measure the properties of waves including height, direction and period. The AMETS programme has been jointly managed by the Marine Institute and the Sustainable Energy Authority of Ireland. Data coverage 100% for when the buoys have been operational. Any data gaps in time period indicate the buoy(s) have been non-operational and have been under maintenance.

Larger Commercial & Industrial Processes Suitability Map. Ground source heat energy, sometimes called shallow geothermal energy, can be collected from the ground and boosted with heat pumps. This can yield up to four times as much energy as is used to collect it, giving ‘four for the price of one’ in energy terms. Heat energy can be harnessed, or ‘collected’, using different types of collector systems: Closed loop collectors are systems where heat is extracted from the ground (or cooling is gained) by pumping a heat exchange fluid through closed pipes within the ground. The pipes can be installed borehole(s) (vertical closed loop) or laid out horizontally (horizontal closed loop). Open loop ground source heat systems operate by taking heat energy from abstracted groundwater using a heat pump. The volume of groundwater that can be abstracted from a borehole or taken from a spring each day (the ‘yield’) determines the total amount of heat energy available, and therefore the size of heat pump that can be used and the size of building that can be heated. The ground source heating/cooling suitability maps indicate which type of ground source heat collector is most compatible with the geology below your site. All maps should be assessed together, since whilst some areas may be unsuitable for one type of ground source heat collector system (‘ground source heat pumps’ or GSHPs), the heat energy can be successfully harnessed by a different type of system. The maps show that there is a shallow geothermal solution for heating or cooling for every location in Ireland. The suitability maps use a suitability rating ranging from 1 (worst) to 5 (best) for each type of heat collector/cooling system. Suitability maps for open loop (domestic/small commercial), open loop (larger commercial/industrial processes) and vertical closed loop systems are available.

Larger Commercial & Industrial Processes Suitability Map. Ground source heat energy, sometimes called shallow geothermal energy, can be collected from the ground and boosted with heat pumps. This can yield up to four times as much energy as is used to collect it, giving ‘four for the price of one’ in energy terms. Heat energy can be harnessed, or ‘collected’, using different types of collector systems: Closed loop collectors are systems where heat is extracted from the ground (or cooling is gained) by pumping a heat exchange fluid through closed pipes within the ground. The pipes can be installed borehole(s) (vertical closed loop) or laid out horizontally (horizontal closed loop). Open loop ground source heat systems operate by taking heat energy from abstracted groundwater using a heat pump. The volume of groundwater that can be abstracted from a borehole or taken from a spring each day (the ‘yield’) determines the total amount of heat energy available, and therefore the size of heat pump that can be used and the size of building that can be heated. The ground source heating/cooling suitability maps indicate which type of ground source heat collector is most compatible with the geology below your site. All maps should be assessed together, since whilst some areas may be unsuitable for one type of ground source heat collector system (‘ground source heat pumps’ or GSHPs), the heat energy can be successfully harnessed by a different type of system. The maps show that there is a shallow geothermal solution for heating or cooling for every location in Ireland. The suitability maps use a suitability rating ranging from 1 (worst) to 5 (best) for each type of heat collector/cooling system. Suitability maps for open loop (domestic/small commercial), open loop (larger commercial/industrial processes) and vertical closed loop systems are available.

Geothermal Open Loop Domestic Suitability Classification. Ground source heat energy, sometimes called shallow geothermal energy, can be collected from the ground and boosted with heat pumps. This can yield up to four times as much energy as is used to collect it, giving ‘four for the price of one’ in energy terms. Heat energy can be harnessed, or ‘collected’, using different types of collector systems: Closed loop collectors are systems where heat is extracted from the ground (or cooling is gained) by pumping a heat exchange fluid through closed pipes within the ground. The pipes can be installed borehole(s) (vertical closed loop) or laid out horizontally (horizontal closed loop). Open loop ground source heat systems operate by taking heat energy from abstracted groundwater using a heat pump. The volume of groundwater that can be abstracted from a borehole or taken from a spring each day (the ‘yield’) determines the total amount of heat energy available, and therefore the size of heat pump that can be used and the size of building that can be heated. The ground source heating/cooling suitability maps indicate which type of ground source heat collector is most compatible with the geology below your site. All maps should be assessed together, since whilst some areas may be unsuitable for one type of ground source heat collector system (‘ground source heat pumps’ or GSHPs), the heat energy can be successfully harnessed by a different type of system. The maps show that there is a shallow geothermal solution for heating or cooling for every location in Ireland. The suitability maps use a suitability rating ranging from 1 (worst) to 5 (best) for each type of heat collector/cooling system. Suitability maps for open loop (domestic/small commercial), open loop (larger commercial/industrial processes) and vertical closed loop systems are available.

Geothermal Open Loop Domestic Suitability Classification. Ground source heat energy, sometimes called shallow geothermal energy, can be collected from the ground and boosted with heat pumps. This can yield up to four times as much energy as is used to collect it, giving ‘four for the price of one’ in energy terms. Heat energy can be harnessed, or ‘collected’, using different types of collector systems: Closed loop collectors are systems where heat is extracted from the ground (or cooling is gained) by pumping a heat exchange fluid through closed pipes within the ground. The pipes can be installed borehole(s) (vertical closed loop) or laid out horizontally (horizontal closed loop). Open loop ground source heat systems operate by taking heat energy from abstracted groundwater using a heat pump. The volume of groundwater that can be abstracted from a borehole or taken from a spring each day (the ‘yield’) determines the total amount of heat energy available, and therefore the size of heat pump that can be used and the size of building that can be heated. The ground source heating/cooling suitability maps indicate which type of ground source heat collector is most compatible with the geology below your site. All maps should be assessed together, since whilst some areas may be unsuitable for one type of ground source heat collector system (‘ground source heat pumps’ or GSHPs), the heat energy can be successfully harnessed by a different type of system. The maps show that there is a shallow geothermal solution for heating or cooling for every location in Ireland. The suitability maps use a suitability rating ranging from 1 (worst) to 5 (best) for each type of heat collector/cooling system. Suitability maps for open loop (domestic/small commercial), open loop (larger commercial/industrial processes) and vertical closed loop systems are available.

Geothermal Vertical Closed Loop Suitability Classification. Ground source heat energy, sometimes called shallow geothermal energy, can be collected from the ground and boosted with heat pumps. This can yield up to four times as much energy as is used to collect it, giving ‘four for the price of one’ in energy terms. Heat energy can be harnessed, or ‘collected’, using different types of collector systems: Closed loop collectors are systems where heat is extracted from the ground (or cooling is gained) by pumping a heat exchange fluid through closed pipes within the ground. The pipes can be installed borehole(s) (vertical closed loop) or laid out horizontally (horizontal closed loop). Open loop ground source heat systems operate by taking heat energy from abstracted groundwater using a heat pump. The volume of groundwater that can be abstracted from a borehole or taken from a spring each day (the ‘yield’) determines the total amount of heat energy available, and therefore the size of heat pump that can be used and the size of building that can be heated. The ground source heating/cooling suitability maps indicate which type of ground source heat collector is most compatible with the geology below your site. All maps should be assessed together, since whilst some areas may be unsuitable for one type of ground source heat collector system (‘ground source heat pumps’ or GSHPs), the heat energy can be successfully harnessed by a different type of system. The maps show that there is a shallow geothermal solution for heating or cooling for every location in Ireland. The suitability maps use a suitability rating ranging from 1 (worst) to 5 (best) for each type of heat collector/cooling system. Suitability maps for open loop (domestic/small commercial), open loop (larger commercial/industrial processes) and vertical closed loop systems are available.

Geothermal Vertical Closed Loop Suitability Classification. Ground source heat energy, sometimes called shallow geothermal energy, can be collected from the ground and boosted with heat pumps. This can yield up to four times as much energy as is used to collect it, giving ‘four for the price of one’ in energy terms. Heat energy can be harnessed, or ‘collected’, using different types of collector systems: Closed loop collectors are systems where heat is extracted from the ground (or cooling is gained) by pumping a heat exchange fluid through closed pipes within the ground. The pipes can be installed borehole(s) (vertical closed loop) or laid out horizontally (horizontal closed loop). Open loop ground source heat systems operate by taking heat energy from abstracted groundwater using a heat pump. The volume of groundwater that can be abstracted from a borehole or taken from a spring each day (the ‘yield’) determines the total amount of heat energy available, and therefore the size of heat pump that can be used and the size of building that can be heated. The ground source heating/cooling suitability maps indicate which type of ground source heat collector is most compatible with the geology below your site. All maps should be assessed together, since whilst some areas may be unsuitable for one type of ground source heat collector system (‘ground source heat pumps’ or GSHPs), the heat energy can be successfully harnessed by a different type of system. The maps show that there is a shallow geothermal solution for heating or cooling for every location in Ireland. The suitability maps use a suitability rating ranging from 1 (worst) to 5 (best) for each type of heat collector/cooling system. Suitability maps for open loop (domestic/small commercial), open loop (larger commercial/industrial processes) and vertical closed loop systems are available.

Dataset present a high-resolution (up to 10 m/pixel) seabed geomorphology map of the entire Irish continental shelf, up to a depth of 200 m below sea level (bsl). The map was produced taking advantage of the high resolution Irish National Seabed Survey (INSS) and INFOMAR multibeam dataset, and using a protocol of modern semi-automated mapping techniques to streamline the results assisted by expert interpretation and corrections. The current version of the map (v2023) is based on all available INSS and INFOMAR multibeam data up to 2023. All previous mapping efforts and existing literature on the Irish shallow shelf geomorphology have also been collated and integrated in the map, re-delineating features using the machine-assisted methodology and critically evaluating the previous interpretations. An internationally standardised terminology and classification scheme, in the form of the MIM-GA two-part scheme, has been adopted, aligning the new map to other international geomorphological work (https://www.infomar.ie/sites/default/files/pdfs/FINAL%20Part%202%20Geomorphology_1.pdf). The map includes both newly identified and re-assessed seabed morphological and geomorphological features (e.g. palaeochannels, drumlins, dunes etc.) and the different types of substrate (e.g. bedrock, unconsolidated or consolidated superficial deposits) that have been interpreted to represent the dominant composition within the top 1-2 metres of the seafloor. This detailed geological digital map is intended firstly as a resource enabling to better inform multiple offshore activities and management of the marine environment on the Irish continental shelf. The information is of importance to a range of stakeholders connected to sea fisheries, aquaculture, renewable energy (wind, wave and tidal power), marine communications, dredging, and aggregate industry. A standardised geomorphological map of the Irish continental shelf.

Collation of shieldbug records submitted the National Biodiversity Data Centre. Geographic Coverage: Island of Ireland and its offshore waters Temporal Coverage: 2016 Species Groups recorded: insect - true bug (Hemiptera) Dataset Status: Dataset is incomplete as it forms part of an ongoing survey

Spatial distribution of Common Swifts in Ireland Geographic Coverage: Island of Ireland Species Groups recorded: bird Dataset Status: Ongoing

Data on the geographic distribution of Irish plants Geographic Coverage: Island of Ireland Temporal Coverage: Data submitted online from 2012 to present Species Groups recorded: quillwort, stonewort, bird, conifer, flowering plant, moss, horsetail, clubmoss, fern Dataset Status: This dataset is continually updated with new records Additional Information: http://vascularplants.biodiversityireland.ie/