The Automated Geospatial Watershed Assessment (AGWA) tool is a GIS-based hydrologic modeling tool that uses commonly available GIS data layers to fully parameterize, execute, and spatially visualize results for the RHEM, KINEROS2, KINEROS-OPUS, SWAT2000, and SWAT2005 watershed runoff and erosion models. Accommodating novice to expert GIS users, it is designed to be used by watershed, water resource, land use, and resource managers and scientists investigating the hydrologic impacts of land-cover/land-use change in small watershed to basin-scale studies. AGWA is currently available as AGWA 1.5 for ArcView 3.x, AGWA 2.x for ArcGIS 9.x, and AGWA 3.X for ArcGIS 10.x. Planning and assessment in land and water resource management are evolving from simple, local-scale problems toward complex, spatially explicit regional ones. Such problems have to be addressed with distributed models that can compute runoff and erosion at different spatial and temporal scales. The extensive data requirements and the difficult task of building input parameter files, however, have long represented an obstacle to the timely and cost-effective use of such complex models by resource managers. The USDA- ARS Southwest Watershed Research Center, in cooperation with the U.S. EPA Office of Research and Development Landscape Ecology Branch, the University of Arizona, and the University of Wyoming, has developed a GIS tool to facilitate this process. A geographic information system (GIS) provides the framework within which spatially-distributed data are collected and used to prepare model input files and evaluate model results. AGWA uses widely available standardized spatial datasets that can be obtained via the internet. The data are used to develop input parameter files for two watershed runoff and erosion models: KINEROS2 and SWAT.
GIS maps of Alabama resource data; includes maps of geology, natural hazards, and water.
View the diversity of challenges and opportunities across America's counties within different types of rural regions and communities. Get statistics on people, jobs, and agriculture.
PDF and shapefile maps and data depicting the coal fields of the conterminous United States. Includes coal production data, coal type rankings, coal ages, and other information.
Hydrologic data, primarily precipitation and runoff, have been collected on experimental watersheds operated by the U.S. Department of Agriculture Agricultural Research Service (USDA-ARS) and on other lands in southeastern Arizona since the 1950s. These data are of national and international importance and make up one of the most comprehensive semiarid watershed data sets in the world. The USDA-ARS Southwest Watershed Research Center has recently developed an electronic data processing system that includes an online interface (https://tucson.ars.ag.gov/dap) to provide public access to the data. The goal of the system is to promote analyses and interpretations of historic and current data by improving data access. The publicly accessible part of the system consists of an interactive Web site, which provides an interface to the data, and a relational database, which is used to process, store, and manage data. In addition, DAP was expanded to put sediment, meteorological, soil moisture and temperature, vegetation, CO2 and water flux, geographic information system (GIS) and aircraft and satellite spectral imagery data on line and to publish metadata for all WGEW long-term measurements.
Hydrologic data, primarily precipitation and runoff, have been collected on experimental watersheds operated by the U.S. Department of Agriculture Agricultural Research Service (USDA-ARS) and on other lands in southeastern Arizona since the 1950s. These data are of national and international importance and make up one of the most comprehensive semiarid watershed data sets in the world. The USDA-ARS Southwest Watershed Research Center has recently developed an electronic data processing system that includes an online interface (https://tucson.ars.ag.gov/dap) to provide public access to the data. The goal of the system is to promote analyses and interpretations of historic and current data by improving data access. The publicly accessible part of the system consists of an interactive Web site, which provides an interface to the data, and a relational database, which is used to process, store, and manage data. In addition, DAP was expanded to put sediment, meteorological, soil moisture and temperature, vegetation, CO2 and water flux, geographic information system (GIS) and aircraft and satellite spectral imagery data on line and to publish metadata for all WGEW long-term measurements.
The Food Access Research Atlas presents a spatial overview of food access indicators for low-income and other census tracts using different measures of supermarket accessibility, provides food access data for populations within census tracts, and offers census-tract-level data on food access that can be downloaded for community planning or research purposes.
Food environment factors--such as store/restaurant proximity, food prices, food and nutrition assistance programs, and community characteristics--interact to influence food choices and diet quality. Research is beginning to document the complexity of these interactions, but more is needed to identify causal relationships and effective policy interventions. The objectives of the Atlas are to assemble statistics on food environment indicators to stimulate research on the determinants of food choices and diet quality, and to provide a spatial overview of a community's ability to access healthy food and its success in doing so.
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
From the site: “The Geologic Atlas of the United States is a set of 227 folios published by the U.S. Geological Survey between 1894 and 1945. Each folio includes both topographic and geologic maps for each quad represented in that folio, as well as description of the basic and economic geology of the area. The Geologic Atlas collection is maintained by the Map & GIS Library. The repository interface with integrated Yahoo! Maps was developed by the Digital Initiatives -- Research & Technology group within the TAMU Libraries using the Manakin interface framework on top of the DSpace digital repository software. Additional files of each map are available for download for use in GIS or Google Earth. A tutorial is provided which describes how to download theses files.”
A set of PYTHON programs to implement image processing of ground and aerial images by offering via graphical user interface (GUI) 1) plot-level metrics extraction through a series of algorithms for image conversion, band math, radiometric/geometric calibrations, segmentation, masking, adaptive region of interest (ROI), gridding, heatmap, and batch process, 2) GIS interface for GeoTIFF pixels to Lat/Lon, UTM conversion, read/write shapefile, Lat/Lon to ROI, grid to polygon, and 3) utility GUI functions for zooming, panning, rotation, images to video, file I/O, and histogram.
From the site: "Coverages showing political boundaries, map indexes, regions, area development districts (ADDs), grids, etc."
USGS map of surficial deposits across the eastern half of the United States. Various downloadable versions of the map are available.
A collection of shapefiles created and compiled by the National Oceanic and Atmospheric Administration. The data is intended to help people understand and predict weather patterns - in particular to plan for potentially dangerous weather conditions such as storms and droughts. From the site: "The National Weather Service produces short-term warnings to protect lives and property. Four types of warnings (Tornado, Severe Thunderstorm, Flash Flood, and Special Marine) include polygon information at the bottom of the warning, highlighting the primary threat area for the warning. Data from these warnings are collected and databased into a real-time set of GIS shapefiles. These files can be downloaded from this website in order to be used real-time in other Geographic Information Systems applications."
Anthracite coal mine permits in PA.
Bituminous coal mine permits in PA.
From the site: "This data set includes all soil map units that are defined as Hydric in the SSURGO data base.The SSURGO data set is a digital soil survey and is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was collected by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. The SSURGO data set consists of georeferenced digital map data and computerized attribute data. The map data are in a full county format and include a detailed, field verified inventory of soils and nonsoil areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. Sometimes a special soil features layer (point and line features) is included. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the Map Unit Interpretations Record relational data base, which gives the proportionate extent of the component soils and their properties. | The data set has been provided to Chester County Departments and PASDA as an ArcView shapefile by the County of Chester, Department of Computer and Information Services. The theme has been reprojected to PA Stateplane (South) NAD83 from its original datum in accordance with the base map standards of the County of Chester. The County of Chester serves as the secondary organization in providing this shapefile, as compared to its originator and primary organization, the Natural Resources Conservation Service."
From the site: "Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data were current as of October 2001 when the cell maps were created in 2002."
From the site: "This raster dataset has been created using the "Floodplains from the PA Explorer CD-ROM edition" for each county in the study area as originated by the Office of Remote Sensing for Earth Resources, Penn State University (see metadata entitled "Bucks FP.doc"). All areas designated in the shapefile were assigned a conservation value of 5. Conservation values were determined by experts gathered by Natural Lands Trust through SmartConservation®. This data set is one of several that have been combined to create an overall aquatic resources conservation value raster for the expanded piedmont ecoregion. Therefore the values were determined as a relative rank, comparable in value only to the other input aquatic resources data. Conservation value ranges from 1 - 10 with 10 being the highest value."
From the site: "The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary."
From the site: "Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data were current as of October 2001 when the cell maps were created in 2002."
From the site: "The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary."
From the site: "An Oil and Gas Location is a DEP primary facility type related to the Oil & Gas Program. The sub-facility types related to Oil and Gas that are included in this layer are:_____ Land Application -- An area where drilling cuttings or waste are disposed by land application Well-- A well associated with oil and/or gas production Pit -- An approved pit that is used for storage of oil and gas well fluids . Some sub facility types are not included in this layer due to security policies."
From the site: "Late in 1994, the Pennsylvania Bureau of Topographic and Geologic Survey was asked to develop a digital physiographic provinces map at 1:100,000 scale. The then-available physiographic provinces map was compiled by the Survey at 1:500,000 scale and published at 1:2,000,000 scale in 1989. A new physiographic provinces map was recompiled on county 1:50,000-scale topographic maps having 20-foot contour intervals. Boundaries based primarily on geology were positioned using published geological maps. Most boundaries were positioned by topographic interpretation. The use of a 20-foot contour interval (a 200-foot interval was used in 1989) resulted in the repositioning of some boundaries. New scale-enhanced understanding of topographic/geologic patterns in the Appalachian Plateaus province resulted in the creation of three new sections and the revision of other section boundaries. The new compilation was reduced 50 percent and transferred to 1:100,000-scale mylar base maps. The province and section boundaries and the late Wisconsinan glacial border were digitized from the mylars, edgematched, assembled into a single dataset, and attributed with physiographic province and section names using UNIX-based Arc/Info. The late Wisconsinan glacial border, which coincides with province and section boundaries in some places, was copied to a separate dataset and removed from the dataset containing the province and section boundaries. There are two datasets for the late Wisconsinan glacial border and the physiographic province and section boundaries. The original datasets are accurate at 1:100,000 scale. The other datasets have been generalized to 1:500,000-scale accuracy for more regional work. A companion dataset consisting of the state and county boundaries of Pennsylvania was compiled from the U.S. Geological Survey (USGS) 1:100,000-scale digital-line-graph (DLG) files for boundaries. The dataset has been attributed with the county names."
From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
From the site: "This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
From the site: "Soil types located in the Spring Creek Watershed. Taken from the Centre County soils classification."
A data delivery application that provides web-based access to of soil, water, climate, land management, and geospatial data produced by Conservation Effects Assessment Project (CEAP) watershed research sites across the United States. Data access via ArcGIS Server and MS SQL Server Enhanced data searches and summary options in Tools Access to high-resolution imagery in the Map>Table of Contents Enhanced graphing options on the Get Data page Transparency sliders for individual map components in the Map>Table of Contents
Note: The Food Environment Atlas contains ERS's most recent and reliable data on food assistance programs, including participants in the SNAP Program. The Supplemental Nutrition Assistance Program (SNAP) Data System is no longer being updated due to inconsistencies and reliability issues in the source data. The Supplemental Nutrition Assistance Program (SNAP) Data System provides time-series data on State and county-level estimates of SNAP participation and benefit levels, combined with area estimates of total population and the number of persons in poverty.
From the site: "Mine plants and operations for commodities monitored by the National Minerals Information Center of the USGS. Operations included are those considered active in 2003 and surveyed by the USGS."
From the site: "A GIS database of geologic units and structural features in Georgia, with lithology, age, data structure, and format written and arranged just like the other states."
From the site: "Location, geologic and mineral economic data for world rare earth mines, deposits, and occurrences compiled from published and non-published sources. Geographic coordinates are provided for 577 of the 799 deposits described here."
From the site: "A GIS database of geologic units and structural features in South Carolina, with lithology, age, data structure, and format written and arranged just like the other states."
From the National Geologic Map Database site: "Geology of the Ewing quadrangle, Kentucky and Virginia"
From the National Geologic Map Database site: "Geology of the Whitley City quadrangle, Kentucky and the Kentucky part of the Winfield quadrangle"