Specific efforts summarized in this report include the following: • Analysis of rock samples within the CO2 injection zone (Muddy Formation) as well as on the sealing formations (Niobrara and Mowry Formations) to determine their petrographic, petrophysical, and mineralogical characteristics. • Reservoir fluid sampling and analysis to characterize the formation water chemistry and to better understand the hydrocarbon composition of the reservoir. • Surface water, groundwater, and shallow vadose zone soil gas sampling and analysis to establish baseline characteristics of surface and shallow subsurface environments prior to CO2 injection. v • Preliminary review of existing literature to identify potential mineralogical effects of CO2 injection within the Bell Creek reservoir and cap rock and also within the overlying groundwater zones in the unlikely event of out-of-zone migration. • Laboratory-based CO2 exposure testing of rock and water samples from the lowest groundwater zone (Hell Creek Formation) overlying the Bell Creek reservoir to better understand the possible effects of out-of-zone CO2 migration to the shallow subsurface.

Mixed open hole logs. Data sets are PDS, LAS, and LPT files that commonly contain multiple logs. Types of logs include mineralogy, fluid saturation, resistivity, gamma ray, density porosity, neutron porosity, photoelectric sonic, PEX, ECS, laterolog, CDL, VDL, bond log, CBL, CCL, MAP image waveform, DSI, FMI, CMR, and PE.

Files containing information on core lithology, mineralogy, and thin section petrography, as well as photos of samples.

Study on the use of organic ligands to extract lanthanides from low temperature geothermal water.

Petrographic and Analytical Results

Files containing information on core lithology, mineralogy, and petrography, as well as photos of samples and relative porosity and permeability data from mercury injection.

This submission includes lithology logs for all Fallon FORGE area wells; determined from core, cuttings, and thin section. Wells included are 84-31, 21-31, 82-36, FOH-3D, 62-36, 18-5, 88-24, 86-25, FOH-2, 14-36, 17-16, 34-33, 35A-11, 51A-20, 62-15, 72-7, 86-15, Carson_Strat_1_36-32, and several others. Lithology logs last updated 3/13/2018 with confirmation well 21-31 data, and revisited existing wells. Also included is well logging data for Fallon FORGE 21-31. Well logging data includes daily reports, well logs (drill rate, lithology, fractures, mud losses, minerals, temperature, gases, and descriptions), mud reports, drilling parameter plots, daily mud loss summaries, survey reports, progress reports, plan view maps (easting, northing), and wireline logs (caliper [with GR], triple combo [GR, caliper, SP, resistivity, array induction, density, photoelectric factor, and neutron porosity], array induction with linear correlation [GR, SP, Array Induction, caliper, conductivity], and monopole compression dipole shear [GR, SP, Caliper, sonic porosity, delta-T compressional, and delta-T shear])

This dataset contains a variety of data about the Fort Bliss geothermal area, part of the southern portion of the Tularosa Basin, New Mexico. The dataset contains schematic models for the McGregor Geothermal System, a shallow temperature survey of the Fort Bliss geothermal area. The dataset also contains Century OH logs, a full temperature profile, and complete logs from well RMI 56-5, including resistivity and porosity data, drill logs with drill rate, depth, lithology, mineralogy, fractures, temperature, pit total, gases, and descriptions among other measurements as well as CDL, CNL, DIL, GR Caliper and Temperature files. A shallow (2 meter depth) temperature survey of the Fort Bliss geothermal area with 63 data points is also included. Two cross sections through the Fort Bliss area, also included, show well position and depth. The surface map included shows faults and well spatial distribution. Inferred and observed fault distributions from gravity surveys around the Fort Bliss geothermal area.

This database is a set of 2828 suspended and bed sediment compositional measurements from 1683 locations around the globe. It is named Global River Sediments (GloRiSe), and includes major, minor and trace elements, along with mineralogical and petrographic data, and provides time-series for some sites. Each observation is complemented by metadata describing geographic location, sampling date and time, sample treatment and measurement details, which allows for grouping and selection of observations, as well as for interoperability with external data sources and improves interpretability.

Mixed wireline logs including both cased and open hole logs. Data sets are PDS, LAS, and excel files that commonly contain multiple logs. Types of wireline logs include gamma ray, neutron porosity, resistivity, laterolog, deviation, sonic, mineral volume, and cement bond logs.

Mineralogical and lithological data from core samples taken at various geothermal wells in the Great Basin: Dixie Valley, Beowawe, Roosevelt, Mammoth, Steamboat Springs, Coso

Mineralogical, lithological, and geospatial data of drill cuttings from exploration production wells in Beowawe, Dixie Valley and Roosvelt Hot Springs. These data support whole rock analyses for major, minor and critical elements to assess critical metals in produced fluids from Nevada and Utah geothermal fields. The samples were analyzed by x-ray diffraction (legacy data) and then checked by thin section analysis.

Mudlog/measured depth logs with quantitative data and descriptions of lithology, mineralogy, porosity, hydrocarbon shows, and drilling activities.

Research references to literature about the Newberry geothermal area, Oregon.

Field and processed PNC logs.

Thin sections, sedimentary graphic logs, and XRD results from CFU31-F2 and CFU31-F3 wells. Data collected as part of geologic characterization phase of SECARB project at the Cranfield oilfield in southwest Mississippi. Thin sections for CFU29-12 well also included. Associated Publications: Kordi, M., 2013, Characterization and prediction of reservoir quality in chlorite-coated sandstones: evidence from the Late Cretaceous Lower Tuscaloosa Formation at Cranfield Field, Mississippi, U.S.A., The University of Texas at Austin, Ph.D. dissertation, 193 p.

Spreadsheet containing the raw measured data, calibrated data, and brief explanation of data for Test1 Stripa Granite Geomechanical/Geochemical Test. Stress on fracture ~20.7 MPa.

Well data for the USGS-142 well located in eastern Snake River Plain, Idaho. This data collection includes lithology reports, borehole logs, and photos of rhyolite core samples. This collection of data has been assembled as part of the site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. They were assembled by the Snake River Geothermal Consortium (SRGC), a team of collaborators that includes members from national laboratories, universities, industry, and federal agencies, lead by the Idaho National Laboratory (INL).

This submission has two shapefiles and a tiff image. The weights of evidence analysis was applied to data representing heat of the earth and fracture permeability using training sites around the Southwest; this is shown in the tiff image. A shapefile of surface temperature anomalies was derived from the statistical analysis of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) thermal infrared data which had been converted to surface temperatures; these anomalies have not been field checked. The second shapefile shows outcrop mineralogy which originally mapped by the New Mexico Bureau of Geology and Mineral Resources, and supplemented with mineralogic information related to rock fracability risk for EGS. Further metadata can be found within each file.

Web Soil Survey (WSS) provides soil data and information produced by the National Cooperative Soil Survey. It is operated by the USDA Natural Resources Conservation Service (NRCS) and provides access to the largest natural resource information system in the world. NRCS has soil maps and data available online for more than 95 percent of the nation’s counties and anticipates having 100 percent in the near future. The site is updated and maintained online as the single authoritative source of soil survey information.

From the site: "Location, type, mineralogy, name, and status for 900 occurrences of asbestiform minerals and fibrous amphiboles."

From the site: "Systematic geochemical and mineralogical survey of soil horizons analyzed using a consistent set of methods, sample spacing 1 per 1,600 sq km."

FMI image log and mud log of well 52B-7

This submission includes the following: - Field Characteristics: Describes the geological and production field characteristics of sampling sites - Geochemistry of Produced Fluids Idaho-Nevada-New Mexico-Oregon-Utah: Summarizes the all the analytical results for aqueous samples collected from geothermal production wells, hydrocarbon production wells, and hot springs. - Geochemistry of Reservoir Rocks & Calcite Scales Nevada-Utah: Analytical results of trace element analyses of reservoir drill cuttings from Beowawe, Dixie Valley, Roosevelt Hot Springs, Uinta Basin, and Paradox Basin (Aneth field); also includes analyses of Dixie Valley calcite scales and rocks in the Sevier Thermal Belt, Utah. - Lithology and mineralogy of drill cuttings from Beowawe, Dixie Valley and Roosevelt Hot Springs: Lithological and mineralogical characterization of drill cuttings from Beowawe, Dixie Valley and Roosevelt Hot Springs - Geological Settings of Critical Element Mineral Deposits: Brief summary and references regarding the geological settings of critical element mineral deposits

This report documents the results of investigations dealing with the concentrations and availabilities of strategic, critical and valuable materials (SCVM) in produced waters from geothermal and hydrocarbon reservoirs (50-250 degrees C) in Idaho, Nevada, New Mexico, Oregon, and Utah. Analytical results were obtained for water samples from 47 production wells in 12 geothermal fields. Results were also obtained for samples from 25 oil/gas production wells in the Uinta and Paradox Basins and Covenant oil field, from 14 groundwater wells in the Tularosa play fairway (New Mexico), and from 20 groundwater wells and hot springs in the Sevier Thermal Belt (southwestern Utah). Please refer to GDR Submission 1126 (linked below) which houses the data summarized in the final report.