This dataset contains Saudi Arabia Amount and percentage of the industrial wastewater 2014-2018 General Authority for Statistics wastewater, Follow datasource.kapsarc.org for timely data to advance energy economics research.

This is benchmark model for wastewater treatment using an activated sludge process. The activated sludge process is a means of treating both municipal and industrial wastewater. The activated sludge process is a multi-chamber reactor unit that uses highly concentrated microorganisms to degrade organics and remove nutrients from wastewater, producing quality effluent. This model provides pollutant concentrations, mass balance, electricity requirements, and treatment costs. This model will be continuously updated based on the latest data.

The associated excel files hold the cost predictions for nitrate and perchlorate treatment based on a series of assumptions outlined in the paper. No experimental data was generated in this project. This dataset is associated with the following publication: Latham , M. SSWR FY14 Output Summary Report: Performance information and design tools are developed for innovative technologies and approaches for Small Drinking Water and Wastewater Systems. U.S. Environmental Protection Agency, Washington, DC, USA.

Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace.

Country-level and gridded wastewater production, collection, treatment and re-use

The Forest Service's Natural Resource Manager (NRM) Forest Activity Tracking System (FACTS) is the agency standard for managing information about activities related to fire/fuels, silviculture, and invasive species. FACTS is an activity tracking application for all levels of the Forest Service. The application allows tracking and monitoring of NEPA decisions as well as the ability to create and manage KV trust fund plans at the timber sale level. This application complements its companion NRM applications, which cover the spectrum of living and non-living natural resource information. This layer represents activities of hazardous fuel treatment reduction that are polygons. All accomplishments toward the unified hazardous fuels reduction target must meet the following definition: Vegetative manipulation designed to create and maintain resilient and sustainable landscapes, including burning, mechanical treatments, and/or other methods that reduce the quantity or change the arrangement of living or dead fuel so that the intensity, severity, or effects of wildland fire are reduced within acceptable ecological parameters and consistent with land management plan objectives, or activities that maintain desired fuel conditions. These conditions should be measurable or predictable using fire behavior prediction models or fire effects models. Metadata

Note: This is a large dataset. To download, go to ArcGIS Open Data Set and click the download button, and under additional resources select the shapefile or geodatabase option. The Forest Service's Natural Resource Manager (NRM) Forest Activity Tracking System (FACTS) is the agency standard for managing information about activities related to fire/fuels, silviculture, and invasive species. FACTS is an activity tracking application for all levels of the Forest Service. The application allows tracking and monitoring of NEPA decisions as well as the ability to create and manage KV trust fund plans at the timber sale level. This application complements its companion NRM applications, which cover the spectrum of living and non-living natural resource information. This layer represents activities of hazardous fuel treatment reduction that are polygons. All accomplishments toward the unified hazardous fuels reduction target must meet the following definition: Vegetative manipulation designed to create and maintain resilient and sustainable landscapes, including burning, mechanical treatments, and/or other methods that reduce the quantity or change the arrangement of living or dead fuel so that the intensity, severity, or effects of wildland fire are reduced within acceptable ecological parameters and consistent with land management plan objectives, or activities that maintain desired fuel conditions. These conditions should be measurable or predictable using fire behavior prediction models or fire effects models. Go to this url for full metadata description: https://data.fs.usda.gov/geodata/edw/edw_resources/meta/S_USA.Activity_HazFuelTrt_PL.xml

The NEWTS (National Energy Water Treatment and Speciation) database dashboard displays sites across the nation where energy-related wastewater stream samples and composition data have been collected. Using the dashboard, community leaders and the public will be able to quickly explore and obtain sample data from locations displayed on a map where various government agencies collect and analyze water samples from energy-related wastewater streams.

OECD Stat is a database of many parameters for member and non-member state, including global data on basic water metrics including: Generation and discharge of wastewater, freshwater resources, water made available for use, wastewater treatment, wastewater treatment capacity from with various years from 1980 to 2018

NIPER-550

Collection of proposed, operating, demonstration, and pilot study potable reuse systems across the U.S. as of 2020. Information includes project name, location, augmentation type, capacity, year operational, treatment train, and source water type. References are included in this submission. As potable reuse facilities undergo expansions or upgrades, treatment trains and capacities are subject to change. Operational status may also change. Treatment trains listed are reported to the detail that the source provides. Type and doses of chemical post-treatment or chlorination is often not specified. Please see README section in spreadsheet for definitions of acronyms used.

This submission presents results and observations from a series of surveys of US municipal desalination plants conducted during the last 20 years. The surveys were conducted to determine the number, characteristics, and concentrate disposal practices of US desalination plants. Each survey was intended to identify and contact each US plant that produces 25,000 gpd or more. This cutoff eliminated smaller plants that serve truck stops, mobile home parks, hospitals, campgrounds, etc. Succeeding surveys did not undertake to recontact all previously contacted plants but focused primarily on plants built since the initial survey.

The Eastern Treatment Plant (ETP) receives sewage from the eastern side of Melbourne. This file describes the quality of the sewage received by providing results of regular sampling.The sample is taken with a flow-weighted auto-sampler. Samples are collected at 7:00 AM each day and relate to the previous 24 hours (e.g. timestamp of 5/1/19 07:00 was sampled between 4/1/19 07:00 and 5/1/19 07:00). Results are in milligrams per litre (mg/L). To calculate an incoming load in raw sewage, match this with wastewater inlet hourly flow for the same time period (as noted in the example).Quality parameters include: Ammonia (Ammonia as N) (mg/L), Biochemical Oxygen Demand (BOD) (mg/L), Chemical Oxygen Demand (COD) (mg/L), Nitrate plus Nitrite (mg/L), Nitrogen (Nitrogen (total)) (mg/L).NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

The Eastern Treatment Plant (ETP) discharges treated effluent  in accordance with EPA Victoria licence AL74284 to an ocean outfall at Boag Rocks. This file contains selected discharge quality data. Samples are taken as a grab sample at the time stamp shown in the file. Results are in milligrams per litre.Quality parameters include: Ammonia (Ammonia as N) (mg/L), Biochemical Oxygen Demand (BOD) (mg/L), Chemical Oxygen Demand (COD) (mg/L), Nitrate plus Nitrite (mg/L), Nitrogen (Nitrogen (total)) (mg/L).NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

The Eastern Treatment Plant (ETP) discharges treated effluent  in accordance with EPA Victoria licence AL74284 to an ocean outfall at Boag Rocks. This file contains hourly flowrate data at the treatment plant pumpstation. From the pumpstation, the effluent takes several hours (typically 4-8 h) to reach the ocean.NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

The Conagua page containing links to 2012-2019 surface and groundwater quality data, from 5000 monitoring sites in Mexico, available in XLS or KMZ files

Location and extent of Melbourne Water natural and constructed (man-made) wetlands and lakes. Captured using the Top Water Level (TWL) of each, includes wetland or lake name, asset section (for As Constructed drawings) and key attributes. Data set required to indicate the location and types of assets used for stormwater treatment (treatment and removal of pollutants from the stormwater system) and flow management (helping maintain the flow of water and reduce the impacts of floods), for ongoing condition monitoring, maintenance and hydrologic or vegetation analysis and to assist with the planning and design, construction of future stormwater management (WSUD) options.NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.