Tier 3 data for Appalachian Basin sectors of New York, Pennsylvania and West Virginia used in a Geothermal Play Fairway Analysis of opportunities for low-temperature direct-use applications of heat. It accompanies data and materials submitted as Geothermal Data Repository Submission "Natural Reservoir Analysis 2016 GPFA-AB" (linked below). Reservoir information are derived from oil and gas exploration and production data sets, or derived from those data based on further analysis. Data reported here encompass locations (horizontal and depth), geologic formation names, lithology, reservoir volume, porosity and permeability, and derived approximations of the quality of the reservoir. These differ from the linked 2015 data submission in that this file presents data for New York that are comparable to those in the other two states. In contrast, the 2015 data available measured differing attributes across the state boundaries.

Mixed open hole logs. Data sets are PDS, LAS, and LPT files that commonly contain multiple logs. Types of logs include mineralogy, fluid saturation, resistivity, gamma ray, density porosity, neutron porosity, photoelectric sonic, PEX, ECS, laterolog, CDL, VDL, bond log, CBL, CCL, MAP image waveform, DSI, FMI, CMR, and PE.

Mixed wireline logs including both cased and open hole logs. Data sets are PDS, LAS, and excel files that commonly contain multiple logs. Types of wireline logs include gamma ray, neutron porosity, photoelectric, sonic, mineral volume, ELAN, FMI, cement bond logs, magnetic resonance, and laterolog.

Mixed wireline logs including both cased and open hole logs. Data sets are PDS, LAS, and excel files that commonly contain multiple logs. Types of wireline logs include gamma ray, neutron porosity, photoelectric, sonic, mineral volume, ELAN, FMI, cement bond logs, magnetic resonance, and laterolog.

This open data contains information about exports of refined products (by product type) in Bahrain. Follow datasource.kapsarc.org and it’s APIs to stay in sync and advance energy economics research.Notes:Figures may not add to total due to rounding.0 less than 1000 barrel

Import volume for products re-inspected by FSIS at the port of entry. Both current and archive files are posted quarterly. See the FSIS website for additional information.

Graph theory is useful for estimating time-dependent model parameters via weighted least-squares using interferometric synthetic aperture radar (InSAR) data. Plotting acquisition dates (epochs) as vertices and pair-wise interferometric combinations as edges defines an incidence graph. The edge-vertex incidence matrix and the normalized edge Laplacian matrix are factors in the covariance matrix for the pair-wise data. Using empirical measures of residual scatter in the pair-wise observations, we estimate the variance at each epoch by inverting the covariance of the pair-wise data. We evaluate the rank deficiency of the corresponding least-squares problem via the edge-vertex incidence matrix. We implement our method in a MATLAB software package called GraphTreeTA available on GitHub (https://github.com/feigl/gipht). We apply temporal adjustment to the data set described in Lu et al. (2005) at Okmok volcano, Alaska, which erupted most recently in 1997 and 2008. The data set contains 44 differential volumetric changes and uncertainties estimated from interferograms between 1997 and 2004. Estimates show that approximately half of the magma volume lost during the 1997 eruption was recovered by the summer of 2003. Between June 2002 and September 2003, the estimated rate of volumetric increase is (6.2 +/- 0.6) x 10^6 m^3/yr. Our preferred model provides a reasonable fit that is compatible with viscoelastic relaxation in the five years following the 1997 eruption. Although we demonstrate the approach using volumetric rates of change, our formulation in terms of incidence graphs applies to any quantity derived from pair-wise differences, such as wrapped phase or wrapped residuals. Date of final oral examination: 05/19/2016 This thesis is approved by the following members of the Final Oral Committee: Kurt L. Feigl, Professor, Geoscience Michael Cardiff, Assistant Professor, Geoscience Clifford H. Thurber, Vilas Distinguished Professor, Geoscience

This is the results of an initial setup-shakedon test in order to develop the plumbing system for this test design. a cylinder of granite with offset holes was jacketed and subjected to confining pressure and low temperature (85C) and pore water pressure. Flow through the sample was developed at different test stages.

Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessible resource base, mean extractable resource and beneficial heat. Data compiled from USGS and other sources. The paper (submitted to GRC 2016) describing the methodology and analysis is also included. * A newer version of this data exists in a more recent submission. See the resources below for more information.

This data provides daily accumulated inflow volumes for wastewater treatment at the two Melbourne Water site (Western and Eastern). This data is collected using network flow monitoring devices. This data has been processed and stored as official inflow volumes received by Melbourne Water over a 24 hour period (12am to 12am). Wastewater volume is the total accumulated flow received from the sewer and stormwater networks. This data set is best used in long and short term wastewater services demand analysis. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

Volume of gasoline reported by the States each month, based on reports from suppliers and distributors. These amounts are reported in various Office of Highway Policy Information (OHPI) products including the longstanding Monthly Motor Fuel Report, and the annual Highway Statistics publications.

The Eastern Treatment Plant (ETP) receives sewage from the eastern side of Melbourne. This file describes the volume of sewage pumped through ETP on an hourly basis.NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.

The Eastern Treatment Plant (ETP) discharges treated effluent  in accordance with EPA Victoria licence AL74284 to an ocean outfall at Boag Rocks. This file contains hourly flowrate data at the treatment plant pumpstation. From the pumpstation, the effluent takes several hours (typically 4-8 h) to reach the ocean.NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.