This data provides daily accumulated inflow volumes for wastewater treatment at the two Melbourne Water site (Western and Eastern). This data is collected using network flow monitoring devices. This data has been processed and stored as official inflow volumes received by Melbourne Water over a 24 hour period (12am to 12am). Wastewater volume is the total accumulated flow received from the sewer and stormwater networks. This data set is best used in long and short term wastewater services demand analysis. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.
The Eastern Treatment Plant (ETP) receives sewage from the eastern side of Melbourne. This file describes the volume of sewage pumped through ETP on an hourly basis.NOTE. Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.
Layer containing water supply system catchment boundaries for water harvesting in the region of Melbourne. Includes catchment name, type, size of catchment and asset identifier. The type are defined by CATCHO (Open), CATCHC (Closed), and CATCH (Restricted). This layer is intended for general mapping purposes and internal use only, and is not to be used for detailed mapping of, or detailed calculation related to, water supply catchments.This layer is updated when new information is received from completed projects and/or updated from certified survey plans. Melbourne Water are responsible for reviewing and accepting information which results in update to the existing layer. Dataset also includes additional catchments captured originally e.g. Graceburn and Donnellys Weir.NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.
Layer containing water supply service reservoirs (location and extent). Service reservoirs are minor local storages. Information captured using as-constructed drawings and aerial imagery, and includes service reservoir name, category / type, asset identifier, as-constructed plan references plus other key attributes. This layer is intended to be used to locate and obtain details on Melbourne Water's water supply transfer assets for asset management, buildover (Dial-Before-You-Dig) and operational or maintenance purposes.This layer is updated when new information is received from completed projects and/or updated from certified survey plans. Melbourne Water are responsible for reviewing and accepting information which results in update to the existing layer. NOTE: Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.
Layer containing water supply storage dams (location and extent). These are major water supply system storages. Captured using as-constructed drawings and aerial imagery, and includes storage dam name, category / type, asset identifier, as=-constructed plan references plus other key attributes. This layer is intended to be used to locate and obtain details on Melbourne Water's water supply transfer assets for asset management, buildover (Dial-Before-You-Dig) and operational or maintenance purposes.This layer is updated when new information is received from completed projects and/or updated from certified survey plans. Melbourne Water are responsible for reviewing and accepting information which results in update to the existing layer.Whilst every effort has been taken in collecting, validating and providing the attached data, Melbourne Water Corporation makes no representations or guarantees as to the accuracy or completeness of this data. Any person or group that uses this data does so at its own risk and should make their own assessment and investigations as to the suitability and/or application of the data. Melbourne Water Corporation shall not be liable in any way to any person or group for loss of any kind including damages, costs, interest, loss of profits or special loss or damage, arising from any use, error, inaccuracy, incompleteness or other defect in this data.