**Overview** Sequence G: Upwind Teetered (F) Test sequence G used an upwind, teetered turbine with a 0° cone angle. The wind speeds ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds and angles of ±10° were achieved at the high wind speeds. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. **Data Details** File naming information can be found in the attached Word document "Sequence G Filename Key", copied from the Phase VI Test Report.

• 00

  uae6/uae6.z06.00
  Download