GIS maps of Alabama resource data; includes maps of geology, natural hazards, and water.

The USGS has conducted numerous assessments of undiscovered oil and gas in the Appalachian Basin, including studies of the Marcellus Shale. The region extends from Alabama to Maine. The downloads are part of an overview of the assessments.

Assessment of Potential Increased Oil Production by Polymer-Waterflood in Northern and Southern Mid-Continent Oil Fields, Quarterly Report, December 31, 1978

Colorado state oil, gas, water and environmental data system

The Fire Services Act, 1981 sets out the rules and regulations for that the fire service works to. The NDFEM provides support to the Local Authorities to make sure these rules and regulations are put in place and that health and safety is prioritised. We provide funding to the fire service for the purchase of appliances and equipment. We also support the fire service by running a national training programme and by publishing guidance on relevant matters and by setting general policy. Dangerous Substances Regulations, 1979

Development of Mobility Control Methods to Improve Oil Recovery by CO2, Second Annual Report, September 1982

Development of Mobility Control Methods to Improve Oil Recovery by CO2, Annual Report, March 1981

Displacement of Oil by Carbon Dioxide (Final Report) This document has no date.

Interactive map depicting oil drilling, gas drilling, coal mining, power plants, refineries, and other data. Includes metadata.

ERMA Gulf Response, powered by Environmental Response Management Application (ERMA), is a web-based Geographic Information System (GIS) tool designed to assist both emergency responders and environmental resource managers who deal with incidents that may adversely impact the environment. This application is currently assisting with response operations for the Deepwater Horizon spill and data regarding this incident is displayed here and updated daily. ERMA is also assisting in resource management decisions in support of Natural Resource Damage Assessment.

NIPER-552

EDX is the Department of Energy (DOE)/Fossil Energy Carbon Management (FECM) virtual library and data laboratory built to find, connect, curate, use and re-use data to advance fossil energy and environmental R&D. Developed and maintained by the National Energy Technology Laboratory (NETL), EDX supports the entire life cycle of data by offering secure, private collaborative workspaces for ongoing research projects until they mature and become catalogued, curated, and published. EDX adheres to DOE Cyber policies as well as domestic and international standards for data curation and citation. This ensures data products pushed public via EDX are afforded a citation for proper accreditation and complies with journal publication requirements.

EIA downloadable gis energy information for the US; includes shapefiles for data on Coal Mines - Surface and Underground, Crude Oil Pipelines, Liquefied Natural Gas Import/Export Terminals, Natural Gas Interstate and Intrastate Pipelines, Natural Gas Market Hubs, NGL Pipelines, Petroleum Product Pipelines, Petroleum Refineries, Petroleum Terminals, Power Plants, and Strategic Petroleum Reserves.

NIPER-583

Enhanced Oil Recovery by Surfactant-Enhanced Volumetric Sweep Efficiency, Second Annual Report, September 1986-September 1987

Evaluation of Deep Wellbore Integrity in the Zama Field

DOE/BC/14447-10

U.S. Department of Energy, Office of Fossil Energy and Carbon Management (FECM) Press Releases and Techlines

This submission offers a link to a web mapping application hosted instance of the Global Oil & Gas Features Database (GOGI), via EDX’s Geocube tool. This offers users with the ability to visualize, interact, and create maps with data of their choice, as well as download specific attributes or fields of view from the database. This data can also be downloaded as a File Geodatabse from EDX at https://edx.netl.doe.gov/dataset/global-oil-gas-features-database. Access the technical report describing how this database was produced using the following link: https://edx.netl.doe.gov/dataset/development-of-an-open-global-oil-and-gas-infrastructure-inventory-and-geodatabase” This data was developed using a combination of big data computing, custom search and data integration algorithms, and expert driven search to collect open oil and gas data resources worldwide. This approach identified over 380 data sets and integrated more than 4.8 million features into the GOGI database. Acknowledgements: This work was funded under the Climate and Clean Air Coalition (CCAC) Oil and Gas Methane Science Studies. The studies are managed by United Nations Environment in collaboration with the Office of the Chief Scientist, Steven Hamburg of the Environmental Defense Fund. Funding was provided by the Environmental Defense Fund, OGCI Companies (Shell, BP, ENI, Petrobras, Repsol, Total, Equinor, CNPC, Saudi Aramco, Exxon, Oxy, Chevron, Pemex) and CCAC.

Explore Saudi Arabia's Gross Domestic Product by institutional sectors at current prices with this comprehensive dataset. Includes data on the Non-Oil Sector, Government Sector, Private Sector, Oil Sector, Quarterly GDP information, and more. Non-Oil Sector, Gross Domestic product, Gross Domestic Product Excluding Import Duties, Import Duties, Non-Oil Sector: Government Sector, Quarterly, Oil Sector, Non-Oil Sector: Private Sector, GDP, oil, Non-Oil, government sector, National Accounts, GDP data Saudi ArabiaFollow data.kapsarc.org for timely data to advance energy economics research..2021: Preliminary Data

Modeling and Optimizing Surfactant Structure to Improve Oil Recovery by Chemical Flooding at the University of Texas DOE/BC/10841-10

DOE/BC/10841-5

Country specific data by year, month and quarter. Most data are available back to 1980. Fuel production, consumption, imports, exports, capacity, stocks, emissions, heat contents, and conversion factors; as well as population, as available for all fuels and countries.

Monthly oil and gas production data by well are now available on the web through the Kentucky Geological Survey oil and gas well search pages. When you search for wells, look for the Production Data link. If there is no link, no production data have been associated with the selected well. The data are reformatted from the monthly oil and gas production data available as text files by county and year from the Kentucky Division of Oil and Gas.

The University of Kentucky and the Kentucky Geological Survey have worked together to collect the oil and gas well locations in Kentucky into GIS-readable shapefile downloads.

Battelle’s MRCSP Phase III monitoring efforts began on February 3, 2013, with an overarching goal of monitoring at least 1 million metric tons (MT) of net CO2 stored within Core Energy’s EOR complex. For the purposes of this report, most of the mass balance accounting data is shown through September 30, 2019, a period of 6 years, 10 months..

DE-AC22-93BC14964

NIPER-497

Maps depicting gas production, shale plays, oil plays, coalbed methane fields, and other data. Maps were developed by GIS software and are in downloadable PDF and JPG format. Maps cover the lower 48 states.

Various map tools from Oil Conservation Division (OCD) of EMNRD.

From the site: "Coal Pillar Locations are pillars of coal that must remain in place to provide support for an oil and gas well on the surface."

From the site: "Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data were current as of October 2001 when the cell maps were created in 2002."

From the site: "The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary."

From the site: "An Oil and Gas Location is a DEP primary facility type related to the Oil & Gas Program. The sub-facility types related to Oil and Gas that are included in this layer are:_____ Land Application -- An area where drilling cuttings or waste are disposed by land application Well-- A well associated with oil and/or gas production Pit -- An approved pit that is used for storage of oil and gas well fluids . Some sub facility types are not included in this layer due to security policies."

From the site: "The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary."

From the site: "The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s)."

The Petroleum Recovery Research Center (PRRC), the only research center of its kind in New Mexico, is a scientific research organization dedicated to solving problems related to the oil and gas industry.

From the site: "Radium activity data for waters co-produced with oil and gas in New York and Pennsylvania have been compiled from publicly available sources and are presented together with new data for six wells, including one time series. When available, total dissolved solids (TDS), and gross alpha and gross beta particle activities also were compiled. Data from the 1990s and earlier are from sandstone and limestone oil/gas reservoirs of Cambrian-Mississippian age; however, the recent data are almost exclusively from the Middle Devonian Marcellus Shale. The Marcellus Shale represents a vast resource of natural gas the size and significance of which have only recently been recognized. Exploitation of the Marcellus involves hydraulic fracturing of the shale to release tightly held gas. Analyses of the water produced with the gas commonly show elevated levels of salinity and radium."

Niper-527

DOE/BC-86/4/sp

Well Information includes information on borehole activities such as drilling activity, counts on the number of boreholes completed, and number of shut-in's.Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary.Additional files are available on well completions and well tests. All surveys are referenced to grid north in the native map projection of the block containing the surface location of the survey.For some old surveys the north reference was not marked and was assumed by BOEM to be grid north. In an effort to improve the quality of our downloadable data, we are now exporting bottom hole locations as calculated from the directional survey associated with the well. The coordinate values were derived using the North American Datum (NAD) 1927.

The geographic dataarebuilt fromtheTechnical Information Management System (TIMS). TIMS consists of two separate databases: an attribute database and a spatial database.The attribute information for offshore activities is stored in theTIMSdatabase. The spatial database is a combination of the ARC/INFO and FINDER databases and contains all the coordinates and topology information for geographic features.The attribute and spatial databases are interconnected through the use of common data elements in both databases,thereby creating the spatial datasets. The data in the mapping filesaremade up of straight-line segments.If an arc existed in the original data, it has been replaced with a series of straight lines that approximate the arc.The Gulf of Mexico OCS Region stores all its mapping data in longitude and latitude format.All coordinates are in NAD 27. Data can be obtained in threetypes of digitalformats: ASCII: American Standard Code for Information Interchange is plain text format where a string of 7 binary digits represents each character. E00: An ArcInfo interchange file format used for system independent exchange of geographic information system (GIS) coverages and associated data. DXF: Drawing Exchange File is a two-dimensional graphics file format supported by PC-based CAD products. DXF data includes no topology.

A history of oil drilling in Alabama from 1999-2007. Includes useful information on oil fields - in particular on pages 52, 53.

Niper-515

Recent USDA/ARS patented technologies on bioenergy and the environment that are available for licensing are described, including summary, contact, benefits, and applications. Updated June 2018.

From the site: "A cells polygon feature class was created by the U.S. Geological Survey (USGS) to illustrate the degree of exploration, type of production, and distribution of production in the United States. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, or the type of production of the wells located within the cell is unknown or dry. The well information was initially retrieved from IHS Inc.'s PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary well data. No proprietary data are displayed or included in the cell maps. The data are current through 10/1/2005."

"This report contains maps and associated spatial data showing historical oil and gas exploration and production in the United States. Because of the proprietary nature of many oil and gas well databases, the United States was divided into cells one-quarter square mile and the production status of all wells in a given cell was aggregated. Base-map reference data are included, using the U.S. Geological Survey (USGS) National Map, the USGS and American Geological Institute (AGI) Global GIS, and a World Shaded Relief map service from the ESRI Geography Network. A hardcopy map was created to synthesize recorded exploration data from 1859, when the first oil well was drilled in the U.S., to 2005. In addition to the hardcopy map product, the data have been refined and made more accessible through the use of Geographic Information System (GIS) tools. The cell data are included in a GIS database constructed for spatial analysis via the USGS Internet Map Service or by importing the data into GIS software such as ArcGIS. The USGS internet map service provides a number of useful and sophisticated geoprocessing and cartographic functions via an internet browser. Also included is a video clip of U.S. oil and gas exploration and production through time."

From the site: "A cells polygon feature class was created by the U.S. Geological Survey (USGS) to illustrate the degree of exploration, type of production, and distribution of production in the State of Ohio. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, or the type of production of the wells located within the cell is unknown or dry. The well information was acquired from the Ohio Department of Natural Resources, Division of Geological Survey in a Geographic Information System (GIS) data layer that contains all of the locatable oil and gas wells in Ohio. Cells were developed as a graphic solution to overcome the problem of displaying proprietary well data. No proprietary data are displayed or included in the cell maps. The data are current as of 2004."

During hydrocarbon production, water is typically co-produced from the geologic formations producing oil and gas. Understanding the composition of these produced waters is important to help investigate the regional hydrogeology, the source of the water, the efficacy of water treatment and disposal plans, potential economic benefits of mineral commodities in the fluids, and the safety of potential sources of drinking or agricultural water. The U.S. Geological Survey National Produced Waters Geochemical Database v2.3 is an updated compilation of geochemical and related information for water from oil and gas wells in the United States. It includes identification and location information, well descriptions, dates, rock properties, physical properties of the water, inorganic chemistry, organic chemistry, and isotopes.

Geologic and Engineering Analyses and Evaluation of Factors Affecting Widespread Development of Devonian DOE/MC/22140-2651